Technical Approval Schedule (TAS)

You are responsible for ensuring that the standards and references given in the schedule are correct and up to date.

Eurocodes and associated UK National Annexes

Eurocode part Title Amendment / Corrigenda  
Eurocode 0 Basis of structural design
BS EN 1990:2002 +A1:2005 Eurocode 0: Basis of structural design +A1:2005

Incorporating corrigenda December 2008 and April 2010

See BD100 Annex A for additional guidance.
NA to BS EN 1990:2002 + A1:2005 UK National Annex to Eurocode 0 Basis of structural design National Amendment No.1 See BD100 Annex A for additional guidance.
Eurocode 1 Actions on structures
BS EN 1991-1-1:2002

 

Eurocode 1: Actions on structures. General Actions. Densities, self-weight, imposed load for buildings Corrigenda December 2004 and March 2009
NA to BS EN 1991-1-1:2002 UK National Annex to Eurocode 1: Actions on structures. General Actions. Densities, self-weight, imposed load for buildings -
BS EN 1991-1-3:2003 +A1:2015 Eurocode 1: Actions on structures. General Actions. Snow loads +A1:2015 Incorporating corrigenda December 2004 and March 2009
NA + A2:18 to BS EN 1991-1-3:2003+A1:2015 UK National Annex to Eurocode 1: Actions on structures. General Actions. Snow loads +A2:2018 Incorporating corrigenda June 2007, December 2015 and October 2018
BS EN 1991-1-4:2005 +A1:2010

 

Eurocode 1: Actions on structures. General Actions. Wind actions +A1:2010

Corrigenda July 2009 and January 2010

NA to BS EN 1991-1-4:2005 + A1:2010 UK National Annex to Eurocode 1: Actions on structures. General Actions. Wind actions National Amendment No.1
BS EN 1991-1-5:2003 Eurocode 1: Actions on structures. General Actions. Thermal actions Corrigenda December 2004 and March 2009
NA to BS EN 1991-1-5:2003 UK National Annex to Eurocode 1: Actions on structures. General Actions. Thermal actions -
BS EN 1991-1-6:2005

 

Eurocode 1: Actions on structures. General Actions. Actions during execution Corrigenda July 2008, November 2012 and February 2013
NA to BS EN 1991-1-6:2005 UK National Annex to Eurocode 1: Actions on structures. General Actions. Actions during execution -
BS EN 1991-1-7:2006 +A1:2014

 

Eurocode 1: Actions on structures. General Actions. Accidental actions +A1: 2014 Corrigendum February 2010
NA+A1 to BS EN 1991-1-7:2006+A1:2014

 

UK National Annex to Eurocode 1: Actions on structures. Part 1-7 : Accidental actions +A1:2014

Incorporating corrigenda August 2014 and November 2015

See BD100 for additional guidance.

 

BS EN 1991-2:2003 Eurocode 1: Actions on structures. Traffic loads on bridges Corrigenda December 2004 and February 2010 See BD100 Annex A for additional guidance.
NA to BS EN 1991-2:2003 UK National Annex to Eurocode 1: Actions on structures. Traffic loads on bridges Corrigendum No.1 See BD100 Annex A for additional guidance.
Eurocode 2 Design of concrete structures
BS EN 1992-1-1:2004 + A1:2014

 

Eurocode 2: Design of concrete structures– Part 1-1: General rules and rules for buildings Incorporating corrigendum January 2008, November 2010 and January 2014
NA + A2:2014 to BS EN 1992-1-1:2004 + A1:2014 UK National Annex to Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings
BS EN 1992-2:2005

 

 

Eurocode 2: Design of concrete structures – Part 2: Concrete bridges – Design and detailing rules Corrigendum July 2008
NA to BS EN 1992-2:2005

 

UK National Annex to Eurocode 2: Design of concrete structure – Part 2: Concrete bridges – Design and detailing rules -
BS EN 1992-3:2006

 

Eurocode 2: Design of concrete structures – Part 3: Liquid retaining and containment structures -
NA to BS EN 1992-3:2006 UK National Annex to Eurocode 2: Design of concrete structures – Part 3: Liquid retaining and containment structures -
BS EN 1992-4:2018 Eurocode 2: Design of concrete structures – Part 4: Design of fastenings for use in concrete    
NA to BS EN 1992-4:2018 UK National Annex to Eurocode 2: Design of concrete structures – Part 4: Design of fastenings for use in concrete    
Eurocode 3 Design of steel structures
BS EN 1993-1-1:2005 + A1:2014

 

Eurocode 3: Design of steel structures – Part 1-1 General rules and rules for buildings Corrigenda February 2006 and April 2009
NA + A1:2014 to BS EN 1993-1-1:2005 + A1:2014 UK National Annex to Eurocode 3: Design of steel structures – Part 1-1 General rules and rules for buildings -
BS EN 1993-1-3:2006

 

 

Eurocode 3: Design of steel structures – Part 1-3 General rules – Supplementary rules for cold-formed members and sheeting Corrigendum November 2009
NA to BS EN 1993-1-3:2006 UK National Annex to Eurocode 3: Design of steel structures – Part 1-3 Supplementary rules for cold-formed members and sheeting -
BS EN 1993-1-4:2006

 

Eurocode 3: Design of steel structures – Part 1-4 General rules – Supplementary rules for stainless steels -
NA to BS EN 1993-1-4:2006 UK National Annex to Eurocode 3: Design of steel structures – Part 1-4 Supplementary rules for stainless steels -
BS EN 1993-1-5:2006+A1:2017

 

Eurocode 3: Design of steel structures – Part 1-5 Plated structural elements Corrigendum April 2009,

+A1:2017 Amendment No. 1

NA to BS EN 1993-1-5:2006

 

UK National Annex to Eurocode 3: Design of steel structures – Part 1-5 Plated structural elements -
BS EN 1993-1-6:2007

 

Eurocode 3: Design of steel structures – Part 1-6 Strength and stability of shell structures + A1:2017

Amendment No. 1

BS EN 1993-1-7:2007

 

Eurocode 3: Design of steel structures – Part 1-7 Plated structures subject to out of plane loading Corrigendum April 2009
BS EN 1993-1-8:2005 Eurocode 3: Design of steel structures – Part 1-8 Design of joints Corrigenda December 2005, September 2006, July 2009 and August 2010
NA to BS EN 1993-1-8:2005 UK National Annex to Eurocode 3: Design of steel structures – Part 1-8 Design of joints -
BS EN 1993-1-9:2005

 

Eurocode 3: Design of steel structures – Part 1-9 Fatigue Corrigenda December 2005, September 2006 and April 2009
NA to BS EN 1993-1-9:2005

 

UK National Annex to Eurocode 3: Design of steel structures – Part 1-9 Fatigue -
BS EN 1993-1-10:2005

 

Eurocode 3: Design of steel structures – Part 1-10 Material toughness and through-thickness properties Corrigenda December 2005, September 2006 and March 2009
NA to BS EN 1993-1-10:2005 UK National Annex to Eurocode 3: Design of steel structures – Part 1-10 Material toughness and through thickness properties -
BS EN 1993-1-11:2006

 

Eurocode 3: Design of steel structures – Part 1-11 Design of structures with tension components Corrigendum April 2009
NA to BS EN 1993-1-11:2006 UK National Annex to Eurocode 3: Design of steel structures – Part 1-11 Design of structures with tension components -
BS EN 1993-1-12:2007

 

 

Eurocode 3: Design of steel structures – Part 1-12 Additional rules for the extension of EN 1993 up to steel grades S 700 Corrigendum April 2009
NA to BS EN 1993-1-12:2007

 

UK National Annex to Eurocode 3: Design of steel structures – Part 1-12 Additional rules for the extension of EN 1993 up to steel grades S 700 -
BS EN 1993-2:2006

 

Eurocode 3: Design of steel structures – Part 2 Steel bridges Corrigendum July 2009
NA + A1:2012 to BS EN 1993-2:2006 UK National Annex to Eurocode 3: Design of steel structures – Part 2 Steel bridges + A1:2012
BS EN 1993-5:2007

 

Eurocode 3: Design of steel structures – Part 5 Piling Corrigendum May 2009
NA + A1:2012 to BS EN 1993-5:2007 UK National Annex to Eurocode 3: Design of steel structures – Part 5 Piling + A1:2012
Eurocode 4 Design of composite steel and concrete structures
BS EN 1994-1-1:2004

 

 

Eurocode 4: Design of composite steel and concrete structures – Part 1-1 General rules and rules for buildings Corrigendum April 2009
NA to BS EN 1994-1-1:2004 UK National Annex to Eurocode 4: Design of composite steel and concrete structures – Part 1-1 General rules and rules for buildings -
BS EN 1994-2:2005

 

 

Eurocode 4: Design of composite steel and concrete structures – Part 2 General rules and rules for bridges Corrigendum July 2008
NA to BS EN 1994-2:2005 UK National Annex to Eurocode 4: Design of composite steel and concrete structures – Part 2 General rules and rules for bridges -
Eurocode 5 Design of timber structures
BS EN 1995-1-1:2004 + A2:2014

 

Eurocode 5: Design of timber structures – Part 1-1 General – common rules and rules for buildings + A2:2014

Incorporating corrigendum June 2006

NA to BS EN 1995-1-1:2004 + A1:2008 UK National Annex to Eurocode 5: Design of timber structures – Part 1-1 General – common rules and rules for buildings + A1:2008

Incorporating National Amendment No. 2

BS EN 1995-2:2004

 

Eurocode 5: Design of timber structures – Part 2 Bridges -
NA to BS EN 1995-2:2004

 

UK National Annex to Eurocode 5: Design of timber structures – Part 2 Bridges -
Eurocode 6 Design of masonry structures
BS EN 1996-1-1:2005+A1:2012

 

 

Eurocode 6: Design of masonry structures – Part 1-1 General rules for reinforced and unreinforced masonry structures +A1:2012

Corrigenda February 2006 and July 2009

NA to BS EN 1996-1-1:2005 +A1:2012 UK National Annex to Eurocode 6: Design of masonry structures – Part 1-1 General rules for reinforced and unreinforced masonry structures Corrigendum October 2015
BS EN 1996-2:2006

 

 

Eurocode 6: Design of masonry structures – Part 2 Design considerations, selection of materials and execution of masonry Corrigendum September 2009
NA to BS EN 1996-2:2006 UK National Annex to Eurocode 6: Design of masonry structures – Part 2 Design considerations, selection of materials and execution of masonry Corrigendum No.1
BS EN 1996-3:2006

 

 

Eurocode 6: Design of masonry structures – Part 3 Simplified calculation methods for unreinforced masonry structures Corrigendum October 2009
NA +A1:2014 to BS EN 1996-3:2006

 

UK National Annex to Eurocode 6: Design of masonry structures – Part 3 Simplified calculation methods for unreinforced masonry structures +A1:2014
Eurocode 7 Geotechnical design
BS EN 1997-1:2004+A1:2013

 

Eurocode 7: Geotechnical design – Part 1 General rules +A1:2013 Corrigendum February 2009
NA+A1 to BS EN 1997-1:2004+A1:2013 UK National Annex to Eurocode 7: Geotechnical design – Part 1 General rules +A1:2013 Incorporating Corrigendum No.1
BS EN 1997-2:2007

 

Eurocode 7: Geotechnical design – Part 2 Ground investigation and testing Corrigendum June 2010
NA to BS EN 1997-2:2007

 

UK National Annex to Eurocode 7: Geotechnical design – Part 2 Ground investigation and testing -
Eurocode 8 Design of structures for earthquake resistance
BS EN 1998-1:2004 + A1:2013

 

 

Eurocode 8: Design of structures for earthquake resistance – Part 1 General rules, seismic actions and rules for buildings Corrigendum June 2009, January 2011 and March 2013
NA to BS EN 1998-1:2004 UK National Annex to Eurocode 8: Design of structures for earthquake resistance – Part 1 General rules, seismic actions and rules for buildings -
BS EN 1998-2:2005+A2:2011

 

Eurocode 8: Design of structures for earthquake resistance – Part 2 Bridges Corrigenda February 2010 and February 2012
NA to BS EN 1998-2:2005 UK National Annex to Eurocode 8: Design of structures for earthquake resistance – Part 2 Bridges -
BS EN 1998-5:2004

 

Eurocode 8: Design of structures for earthquake resistance – Part 5 Foundations, retaining structures and geotechnical aspects -
NA to BS EN 1998-5:2004

 

UK National Annex to Eurocode 8: Design of structures for earthquake resistance – Part 5 Foundations, retaining structures and geotechnical aspects -
Eurocode 9 Design of aluminium structures
BS EN 1999-1-1:2007 + A2:2013

 

Eurocode 9: Design of aluminium structures– Part 1-1 General structural rules + A2:2013 Incorporating corrigendum March 2014
NA to BS EN 1999-1-1:2007 + A1:2009 UK National Annex to Eurocode 9: Design of aluminium structures – Part 1-1 General structural rules National Amendment No.1 Corrigendum No.1
BS EN 1999-1-3:2007 + A1:2011

 

Eurocode 9: Design of aluminium structures – Part 1-3 Structures susceptible to fatigue + A1:2011
NA to BS EN 1999-1-3:2007 + A1:2011

 

UK National Annex to Eurocode 9: Design of aluminium structures – Part 1-3 Structures susceptible to fatigue + A1:2011
BS EN 1999-1-4:2007 +A1:2011

 

Eurocode 9: Design of aluminium structures – Part 1-4 Cold formed structural sheeting + A1:2011

Corrigendum November 2009

NA to BS EN 1999-1-4:2007

 

UK National Annex to Eurocode 9: Design of aluminium structures – Part 1-4 Cold formed structural sheeting -

 

Bsi Published Documents

For guidance only unless clauses are otherwise specified in BD 100/16 Annex B.

PD 6688-1-1:2011 Recommendations for the design of structures to BS EN 1991-1-1 See BD100 Annex B for additional guidance.
PD 6688-1-4:2015

 

Background paper to the UK National Annex to BS EN 1991-1-4 See BD100 Annex B for additional guidance.
PD 6688-1-7:2009 +A1:2014 Recommendations for the design of structures to BS EN 1991-1-7 See BD100 clause 2.17 and Annex B for additional guidance.
PD 6688-2:2011 Recommendations for the design of structures to BS EN 1991-2 See BD100 Annex B for additional guidance.
PD 6687-1:2010

 

Background paper to the UK National Annexes to BS EN 1992-1 and BS EN 1992-3 See BD100 clauses 2.15, 2.16 and Annex B for additional guidance.
PD 6687-2:2008

 

Recommendations for the design of structures to BS EN 1992-2:2005 See BD100 clause 2.16 and Annex B for additional guidance.
PD 6695-1-9:2008

 

Recommendations for the design of structures to BS EN 1993-1-9 See BD100 Annex B for additional guidance.
PD 6695-1-10:2009

 

Recommendations for the design of structures to BS EN 1993-1-10 See BD100 Annex B for additional guidance.
PD 6695-2:2008 + A1:2012 Incorporating Corrigendum No.1 Recommendation for the design of bridges to BS EN 1993 See BD100 Annex B for additional guidance.
PD 6696-2:2007 + A1:2012

 

Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2 See BD100 Annex B for additional guidance.
PD 6694-1:2011 Recommendations for the design of structures subject to traffic loading to BS EN 1997-1 See BD100 Annex B for additional guidance.
PD 6698:2009

 

Recommendations for the design of structures for earthquake resistance to BS EN 1998 See BD100 Annex A for additional guidance.
PD 6703:2009

 

Structural bearings – Guidance on the use of structural bearings
PD 6705-2:2010  + A1:2013

 

Recommendations for the execution of steel bridges to BS EN 1090-2 Amended 30 April 2013
PD 6705-3:2009 Recommendations on the execution of aluminium structures to BS EN 1090-3
PD 6702-1:2009 Structural use of aluminium. Recommendations for the design of aluminium structures to BS EN 1999

 

Execution Standards referenced in British Standards or Eurocodes

BS EN 1090-1:2009+A1:2011

 

Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
BS EN 1090-2:2018

 

Execution of steel structures and aluminium structures. Technical requirements for the execution of steel structures Supersedes BS EN 1090-2:2008+A1:2011

 

BS EN 1090-3:2008

 

Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures
BS EN 13670:2009

Incorporating corrigenda October 2015 and November 2015

Execution of concrete structures

 

Product Standards referenced in British Standards or Eurocodes

BS EN 206:2013

 

Concrete – Specification, performance, production and conformity Corrigendum May 2014
BS EN 1317-1:2010 Road Restraint Systems – Part 1 – Terminology and general criteria for test methods
BS EN 1317-2:2010 Road Restraint Systems – Part 2 – Performance classes, impact test acceptance criteria and test methods for safety barriers.
BS EN 1317-3:2010 Road Restraint Systems – Part 3 – Performance classes, impact test acceptance criteria and test methods for crash cushions.
DD ENV 1317-4:2002 Road Restraint Systems – Part 4 – Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers. Draft BS EN 1317-4 for public comment published in June 2012
BS EN 1317-5:2007+A2:2012 Road Restraint Systems – Part 5 - Product requirements and evaluation of conformity for vehicle restraint systems Incorporating corrigendum August 2012

Draft prEN 1317-5 for public comment published in December 2013

PD CEN/TR 16949:2016 Road Restraint System – Pedestrian restraint system - Pedestrian parapets Bsi Published Document / CEN Technical Report published in July 2016

 

(This document should temporarily not be used. The requirements of BS 7818:1995 apply.)

Draft prEN 1317-7 Road restraint systems - Part 7: Performance classes, impact test acceptance criteria and test methods for terminals of safety barriers Draft prEN 1317-7 for public comment published in June 2012
PD CEN/TS 1317-8:2012 Road restraint systems - Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers Bsi Published Document / CEN Technical Specification published in May 2012
PD CEN/TR 17081:2018 Design of fastenings for use in concrete – Plastic design of fastenings with headed and post-installed fasteners  
BS EN 1337-1:2000 Structural bearings – Part 1: General Design Rules
BS EN 1337-2:2004 Structural bearings – Part 2: Sliding elements
BS EN 1337-3:2005 Structural bearings – Part 3: Elastomeric bearings
BS EN 1337-4:2004 Structural bearings – Part 4: Roller bearings
BS EN 1337-5:2005 Structural bearings – Part 5: Pot bearings
BS EN 1337-6:2004 Structural bearings – Part 6: Rocker bearings
BS EN 1337-7:2004 Structural bearings – Part 7: Spherical and cylindrical PTFE bearings
BS EN 1337-8:2007 Structural bearings – Part 8: Guide bearings and restraint bearings
BS EN 1337-9:1998 Structural bearings – Part 9: Protection
BS EN 1337-10:2003 Structural bearings – Part 10: Inspection and maintenance
BS EN 1337-11:1998 Structural bearings – Part 11: Transport, Storage and Installation.
BS EN 1794-1:2003 Road traffic noise reducing devices – Non-acoustic performance Part 1: Mechanical performance and stability requirements There is a newer version, however the harmonised standard BS EN 14388:2005 makes reference to the 2003 version
BS EN 1794-2:2003 Road traffic noise reducing devices – Non-acoustic performance Part 2: General safety and environmental requirements There is a newer version, however the harmonised standard BS EN 14388:2005 makes reference to the 2003 version
BS EN 10025-1:2004 Hot rolled products of structural steels Part 1: General technical delivery conditions.
BS EN 10025-2:2004 Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels.
BS EN 10025-3:2004 Hot rolled products of structural steels Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels.
BS EN 10025-4:2004 Hot rolled products of structural steels Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.
BS EN 10025-5:2004 Hot rolled products of structural steels – Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

 

BS EN 10025-6:2004+A1:2009 Hot rolled products of structural steels – Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition.
BS EN 10080:2005 Steel for the reinforcement of concrete – Weldable reinforcing steel - General
BS EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
BS EN 10210-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels – Part 2: Tolerances, dimensions and sectional properties Incorporating corrigendum no.1
BS EN 10248-1:1996 Hot rolled sheet piling of non alloy steels.

Technical delivery conditions

BS EN 10248-2:1996 Hot rolled sheet piling of non alloy steels.

Tolerances on shape and dimensions

BS EN 12063:1999 Execution of special geotechnical work. Sheet pile walls.
BS EN 14388:2005 Road traffic noise reducing devices There is a 2015 version, however the 2015 version is not harmonised.
BS EN 15050:2007 + A1:2012 Precast concrete products – Bridge elements See BD100 clause 2.18 for additional guidance.

 

British Standards

BS 4449:2005+A3:2016 Steel for the reinforcement of concrete No longer covers plain round bar. (See BS4482 up to 12mm dia, see BS EN 10025-1 for larger sizes and dowels. See BS EN 13877-3 for dowel bars in concrete pavements.)
BS 5896:2012 Specification for high tensile steel wire and strand for the prestressing of concrete
BS 7818:1995 Specification for pedestrian restraint systems in metal Currently the requirements of BS 7818:1995 are to be used instead of PD CEN/TR 16949:2016
BS 8002:2015 Code of practice for earth retaining structures
BS 8004:2015 Code of practice for foundations
BS 8006-1:2010+A1:2016

 

Code of practice for strengthened/reinforced soils and other fills  
BS 8500-1:2015+A2:2019 Concrete – Complementary British Standard to BS EN 206: Method of specifying and guidance for the specifier. Incorporating Corrigendum No.1

 

Amendment +A2:2019

 

BS 8500-2:2015+A2:2019 Concrete – Complementary British Standard to BS EN 206 : Specification for constituent materials and concrete. Amendment +A2:2019
BS 8666:2005 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete Incorporating Amendment No.1

 

The Manual Contract Document for Highway Works (MCHW)

MCHW Volume 1:

May 2017

Specification for Highway Works Specification compliant with the execution standards must be used. A Departure is necessary for the parts where a compliant revision has not been published.
MCHW Volume 2:

May 2017

Notes for guidance on the Specification for Highway Works Notes for guidance compliant with the execution standards must be used. A Departure is necessary for the parts where a compliant revision has not been published.
MCHW Volume 3: February 2017 Highway Construction Details

 

The Design Manual for Roads and Bridges (DMRB)

BD 2/12 Technical Approval of Highway Structures
BD 7/01 Weathering steel for highway structures See IAN 124/11 Annex C for additional guidance.
BD 10/97 Design of highway structures in areas of mining subsidence See IAN 124/11 Annex C for additional guidance.
CD 365 Portal and cantilever signs/signals gantries Supersedes BD 51/14, IAN 193/16, BE 7/04
CD 375 Design of corrugated steel buried structures Replaces BD 12/01
BD 29/17 Design criteria for footbridges  
BD 33/94 Expansion joints for use in highway bridge decks See IAN 124/11 Annex C for additional guidance.
BD 35/14 Quality assurance scheme for paints and similar protective coatings
BD 36/92 Evaluation of maintenance costs in comparing alternative designs for highway structures
BD 43/03 The impregnation of reinforced and prestressed concrete highway structures using hydrophobic pore-lining impregnants
BD 45/93 Identification markings of highway structures
BD 47/99 Waterproofing and surfacing of concrete bridge decks See IAN 124/11 Annex C for additional guidance.
BD 51/14 Portal and cantilever signs/signal gantries (Superseded by CD 365 Portal and cantilever signs/signals gantries)
BD 57/01 Design for durability Not to be used. See IAN 124/11 Annex C for additional guidance.
BD 62/07 As built, operational and maintenance records for highway structures See IAN 124/11 Annex C for additional guidance.
BD 65/14 Design criteria for collision protection beams
BD 67/96 Enclosure of bridges See IAN 124/11 Annex C for additional guidance.
BD 68/97 Crib retaining walls Withdrawn
BD 78/99 Design of road tunnels See IAN 124/11 Annex C for additional guidance.
BD 82/00 Design of buried rigid pipes Withdrawn
BD 90/05 Design of FRP bridges and highway structures
BD 94/17 Design of minor structures
BD 100/16 The use of Eurocodes for the design of highway structures  
BA 26/94 Expansion joints for use in highway bridge decks See IAN 124/11 Annex C for additional guidance.
BA 28/92 Evaluation of maintenance costs in comparing alternative designs for highway structures
BA 36/90 The use of permanent formwork Not to be used. See IAN 124/11 Annex C for additional guidance.
BA 41/98 The design and appearance of bridges
BA 42/96 The design of integral bridges Not to be used. See IAN 124/11 Annex C for additional guidance.
BA 47/99 Waterproofing and surfacing of concrete bridge decks See IAN 124/11 Annex C for additional guidance.
BA 57/01 Design for durability Not to be used. See IAN 124/11 Annex C for additional guidance.
BA 59/94 Design of highway bridges for hydraulic action. Not to be used. See IAN 124/11 Annex C for additional guidance.
BA 67/96 Enclosure of bridges See IAN 124/11 Annex C for additional guidance.
BA 68/97 Crib retaining walls
BA 82/00 Formation of continuity joints in bridge decks
BA 85/04 Coatings for concrete highway structures & ancillary structures
BA 92/07 Use of recycled concrete aggregates in structural concrete
TD 19/06 Requirement for road restraint systems See IAN 124/11 Annex C for additional guidance.
TD 27/05 Cross-sections and headrooms See IAN 124/11 Annex C for additional guidance.
HD 22/08 Managing geotechnical risk  
HA 66/95 Environmental barriers See IAN 124/11 Annex C for additional guidance.

Work on update being undertaken.

GG 101 Introduction to the Design Manual for Roads and Bridges Replaces GD 01/16
GD 02/16 Quality Management Systems for Highway Design  
GG 104 Requirements for Safety Risk Assessment Replaces GD 04/12

 

Interim Advice Notes

IAN 69/15 Designing for maintenance
IAN 83/06 Principal and General Inspection of Sign/Signal Gantries, and Gantries with low handrails or open mesh flooring
IAN 96/07r1 Guidance on implementing results of research on bridge deck waterproofing.
IAN 97/07 Assessment and upgrading of existing parapets
IAN 104/15 The anchorage of reinforcement and fixings in hardened concrete.
IAN 105/08 Implementation of construction (design and management) 2007 and the withdrawal of SD 10 and SD 11
IAN 117/08r2 Certification of combined kerb and drainage products
IAN 124/11 Annex C Use of Eurocodes for the design of highway structures
IAN 127/10r1 The use of foamed concrete
IAN 131/11 Deflection of Permanent Formwork
IAN 136/10 Structural safety reporting
IAN 149/17 Existing Motorway Minimum Requirements
IAN 161/15 Smart Motorways
IAN 177/13 Introduction of the Construction Products Regulation (EU) 305/2011

(Withdrawn)

IAN 184/16 Highways Agency Data & CAD Standard
IAN 186/15 In-situ concrete barriers based on proprietary designs commercialised as products (Withdrawn)
IAN 193/16 Requirements for the provision of access arrangements on gantries

(Superseded by CD 365 Portal and cantilever signs/signals gantries)

 

Miscellaneous

CHE Memorandum 227/08

 

The Impregnation of Reinforced and Prestressed Concrete Highway Structures using Hydrophobic Pore Lining Impregnants CHE memoranda are internal Highways England documents and not available to external organisations.

This CHE memorandum is included as a useful reference for the Technical Approval Authority.

CIRIA C543 Bridge Detailing Guide
CIRIA C766 Control of cracking caused by restrained deformation in concrete Supersedes C660
CIRIA C686 Safe Access for Maintenance and Repair
CIRIA C760 Guidance on embedded retaining wall design

 

2 thoughts on “Technical Approval Schedule (TAS)”

Leave a Reply to admin Cancel reply

Your email address will not be published. Required fields are marked *